SDS

US. California Code of Regulations, Title 8, Section 5155. Airborne Contaminants
Form
ValueComponents Type
PEL 9000 mg/m3carbon dioxide (CAS
124-38-9)
5000 ppm
STEL 54000 mg/m3
30000 ppm
PEL 5 mg/m3 Mist.distillates (petroleum),
hydrotreated heavy
paraffinic (CAS 64742-54-7)
PEL 5 mg/m3 Mist.paraffin oils (petroleum),
catalytic dewaxed heavy
(CAS 64742-70-7)
PEL 5 mg/m3 Mist.paraffin oils (petroleum),
catalytic dewaxed light
(CAS 64742-71-8)
PEL 5 mg/m3 Mist.petrolatum (CAS
8009-03-8)
No biological exposure limits noted for the ingredient(s).
Biological limit values
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear protective gloves such as: Neoprene. Nitrile.
Hand protection
Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.
Other
If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained
breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to
determine actual employee exposure levels.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants. Contaminated work clothing should not
be allowed out of the workplace.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Blue green
Color
Pleasant.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
380 °F (193.3 °C) estimated
Flash point
192.0 °F (88.9 °C) Setaflash
Evaporation rate
Slow.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
0.6 % estimated
5 / 11
Material name: 3-36® Multi-Purpose Lubricant & Corrosion Inhibitor - 11 oz
No. 03005 (Item# 1003255) Version #: 02 Revision date: 07-02-2021 Issue date: 03-02-2020
SDS US