MSDS

US. ACGIH Threshold Limit Values
ValueComponents
Form
Type
TWA 5 mg/m3 Inhalable fraction.
white mineral oil
(petroleum) (CAS
8042-47-5)
US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents
Form
Type
TWA 100 mg/m3distillates (petroleum),
hydrotreated light (CAS
64742-47-8)
STEL 10 mg/m3 Mist.
white mineral oil
(petroleum) (CAS
8042-47-5)
TWA 5 mg/m3 Mist.
No biological exposure limits noted for the ingredient(s).
Biological limit values
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear protective gloves such as: Nitrile. Neoprene.
Hand protection
Wear suitable protective clothing.
Other
If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained
breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to
determine actual employee exposure levels.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Clear.
Color
Odorless.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-56.2 °F (-49 °C) estimated
Initial boiling point and boiling
range
424.4 °F (218 °C) estimated
Flash point
200 °F (93.3 °C) Tag Closed Cup
Evaporation rate
Very slow.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
0.6 % estimated
Flammability limit - upper
(%)
5.5 % estimated
Vapor pressure
0.5 hPa estimated
Vapor density
> 1 (air = 1)
Relative density
0.81
3 / 7
Material name: Food Grade Penetrating Oil
03087 Version #: 03 Revision date: 08-04-2016 Issue date: 02-27-2014
SDS US