Cut Sheet

ManualsBrandsCRC ManualsChemicals & Cleaning SuppliesA high performance, industrial strength degreaser that is non-conductive, non-corrosive, non-staining and has no flash or fire point

CRC Industries, Inc.

885 Louis Drive  Warminster PA  18974

Technical Data Sheet

T-Force® Degreaser

Revolutionary Technology

I. Product Description

CRC T-Force® Degreaser utilizes revolutionary technology that combines the power of a high performance,

industrial strength degreaser with lower VOCs (aerosol). T-Force® Degreaser is non-conductive, non-corrosive,

non-staining and has no flash point. It quickly dissolves grease, oil and sludge for more efficient operation of

mechanical equipment. T-Force® Degreaser evaporates rapidly, leaves no residue, and has a good health & safety

profile.

II. Applications

Recommended for the effective removal of grease, oil, corrosion and sludge from air tools, mechanical brakes,

clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators and compressors.

III. Features & Benefits

 Revolutionary Technology. Formula offers performance of Trichloroethylene, Perchloroethylene and n-

Propyl Bromide without the associated risks.

 Reduced VOC formula. (Aerosol SKU Only)

 No Flash Point.

 Fast Evaporating, No Residue. Minimizes downtime associated with “clean-in-place” cleaning methods.

 No Class I or Class II Ozone Depleting Chemicals.

 S.D.[L.]



Safety Data Label provides instant access to current safety information should an accident or

OSHA inspection occur. Helps comply with OSHA Hazard Communications Standard 29 CFR 1910.1200.

(Aerosol SKU Only)

IV. Physical Properties without propellant

Flash Point

None

Boiling Point

~104ºF

Odor

Ethereal

Freezing Point

Appearance

Colorless liquid

Solubility

Neg. in water

Vapor Density

>1 (air = 1)

% VOC (Fed) Aerosol Bulk

42.4 85

Vapor Pressure (Calculated)

~283 mmHg @ 68F

Specific Gravity

1.276 @ 68 F

VOC Content (Fed) Aerosol Bulk

Propellant (Aerosol)

HFC-134a & CO

541.0 g/L 1084.6 g/L

Sara Title III, Sect. 313 Chemicals

V. Specifications and Approvals

 NSF registered Category Code: K1 (#140542) (Aerosol) and K1 (#146292) (Bulk) for use in meat and poultry

plants.

 Meets the requirements of Boeing D6 -17487 with the exception of acrylic crazing.

Summary of content (2 pages)

PAGE 1
CRC Industries, Inc. Technical Data Sheet 885 Louis Drive  Warminster PA  18974 T-Force® Degreaser Revolutionary Technology I. Product Description CRC T-Force® Degreaser utilizes revolutionary technology that combines the power of a high performance, industrial strength degreaser with lower VOCs (aerosol). T-Force® Degreaser is non-conductive, non-corrosive, non-staining and has no flash point. It quickly dissolves grease, oil and sludge for more efficient operation of mechanical equipment.
PAGE 2
T-Force® Degreaser Revolutionary Technology Degreaser VI. Performance Characteristics 97 39,000 volts ASTM D-1130 (KB Value) ASTM D-877 (Dielectric Strength) VII. Directions         For personal safety, do not use while equipment is energized. Remove mechanical plates, covers, etc. to expose equipment interior. For best results, remove heavy deposits of contaminants by scraping with a knife or wire brush. Spray liberally and allow to run off. Use extension tube for hard-to-reach areas.