Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
COPPER PASTE
Creationdate :
09.10.17 Version : 2.0
Ref.Nr.:
BDS001991_3_20171009 (EN)
Replaces:
BDS001991_20170629
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
It is good practice to wear gloves and to provide adequate ventilation whenever
using the product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
hands and skin :
For accidental contact the use of disposable gloves should be sufficient
provided they are changed immediately after a splash or spill may occur. If
intentional contact is expected reusable gloves should be used with a
breakthrough time greater than the total duration of the product use.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Paste.
colour :
Copper.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
Not available.
Flash point :
> 250 °C
Evaporation rate :
Not available.
Explosion limits : upper limit :
Not available.
lower limit :
Not available.
Vapour pressure :
Not available.
Relative density :
0.99 g/cm3 (@ 20°C).
Solubility in water :
Insoluble in water
Auto-ignition :
> 200 °C
Viscosity :
Not available.
9.2. Other information
VOC = volatile organic
compounds
0 g/l
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions