Certifications 2

Occupational exposure limits
UK. EH40 Workplace Exposure Limits (WELs)
ValueComponents Type
STEL 1250 mg/m3Propan-2-ol; Isopropyl
alcohol; Isopropanol (CAS
67-63-0)
500 ppm
TWA 999 mg/m3
400 ppm
No biological exposure limits noted for the ingredient(s).
Biological limit values
Follow standard monitoring procedures.
Recommended monitoring
procedures
Derived no effect levels (DNELs)
General Population
NotesAssessment factorValueComponents
Hydrocarbons, C6-C7, n-alkanes,isoalkanes,cyclics,< 5% n-hexane (CAS -)
Long-term, Systemic, Dermal 699 mg/kg bw/day
Long-term, Systemic, Inhalation 608 mg/m3
Long-term, Systemic, Oral 699 mg/kg bw/day
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Long-term, Systemic, Dermal 2 Repeated dose toxicity319 mg/kg bw/day
Long-term, Systemic, Inhalation 2 Repeated dose toxicity89 mg/m3
Long-term, Systemic, Oral 2 Repeated dose toxicity26 mg/kg bw/day
Workers
NotesAssessment factorValueComponents
Hydrocarbons, C6-C7, n-alkanes,isoalkanes,cyclics,< 5% n-hexane (CAS -)
Long-term, Systemic, Dermal 773 mg/kg bw/day
Long-term, Systemic, Inhalation 2035 mg/m3
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Long-term, Systemic, Dermal 1888 mg/kg bw/day
Long-term, Systemic, Inhalation 1500 mg/m3
Predicted no effect concentrations (PNECs)
Components
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Freshwater
Value
140.9 mg/l
Assessment factor
1
Notes
Secondary poisoning 160 mg/kg 30 Oral
Sediment (freshwater) 552 mg/kg
Soil 28 mg/kg
8.2. Exposure controls
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station and safety
shower.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
General information
Wear safety glasses with side shields (or goggles). Use eye protection conforming to EN 166.
Eye/face protection
Skin protection
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough
time of the glove should be longer than the total duration of product use. If work lasts longer than
the breakthrough time, gloves should be changed part-way through. Nitrile gloves are
recommended. Suitable gloves can be recommended by the glove supplier.
- Hand protection
Wear appropriate chemical resistant clothing.
- Other
In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator with
organic vapour cartridge and full facepiece. (Filter type AX)
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
SDS GREAT BRITAIN
Material name: Dry Lube - Manufacturers
BDS002518AE Version #: 1.0 Revision date: 15-March-2022 Issue date: 15-March-2022
4 / 10