Datasheet

BELT GRIP

www.crcind.com

Technical

Data

Sheet

P a g e | 1

Technical Data Sheet

Product name: Belt Grip Creation date: 25 March 2016 Version: 1

Sales code: 32601 Replaces: 0

Section 1: General description

Friction improver to ensure traction and transport drive belts run smoothly without stutter and slip.

A non-toxic friction improvement fluid with good plastic and rubber compatibility. Intended for use in

the food processing industry where incidental food contact may occur.

Section 2: Features

 Equipped with the exclusive Perma Lock System

o Integrated short and long distance applicator.

o Secured spray straw can not get lost.

o The locked actuator can not detach or get lost.

o Green color actuator, indicating H1 Food Processing Safe.

 Registered NSF class H1.

 Ensures your belt runs efficiently

 Increases driving power means lower energy consumption.

 Reduces squeaking noises from slipping belts.

 Forms a water resistant film.

 Complies with BRC Global Standard (Issue 7) - 4.7.6.

Section 3: Applications

 Can be applied on round-, flat- and V-belts.

 Forces the old belts on a multiple drive, to take their part of the power while the new belt

elongates.

 Helps to a steady go of goods transported over belts on slopes.

TECHNICAL DATA SHEET

PAGE 1
BELT GRIP Technical Data Sheet Product name: Belt Grip Sales code: 32601 Creation date: 25 March 2016 Version: Replaces: 1 0 Section 1: General description Friction improver to ensure traction and transport drive belts run smoothly without stutter and slip. A non-toxic friction improvement fluid with good plastic and rubber compatibility. Intended for use in the food processing industry where incidental food contact may occur.
PAGE 2
Section 4: Directions       Avoid mixing with other lubricants Do not use on energized equipment Spray a light, even coating on the pulling sides of the belt. Re-apply occasionally to ensure continued high performance. Allow the solvents to evaporate for a couple of minutes before starting the operation. Remove over-spray with a suitable cleaner. On our web site, a safety data sheet (SDS) is available for all CRC products. The SDS accords to EU directive 91/155/EEC and it's amendments.
PAGE 3
BELT GRIP Technical Data Sheet Section 6: Packaging Aerosol : 12 x 500 ml All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment and conditions and the unpredictable human factors involved, we recommend that our products be tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied.