Datasheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
SP 350
Creationdate :
29.06.17 Version : 1.1
Ref.Nr.:
BDS001847_3_20170629 (EN)
Replaces:
BDS001847_20160513
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
6 / 10
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type AX)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
Recommended gloves:
Nitrile
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Depending on amount and duration of use and the risk of contact with the
product the gloves manufacturer can assist you in the selection of the right
glove material and breakthrough time.
eyes :
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
CO2 propelled liquid.
colour :
Off-white.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
60-250 °C
Flash point :
< 0 °C
Evaporation rate :
Not applicable.
Explosion limits : upper limit :
Not available.
lower limit :
Not available.
Vapour pressure :
Not available.
Relative density :
0.82 g/cm3 (@ 20°C).
Solubility in water :
Emulsifies with water
Auto-ignition :
> 200 °C
Viscosity :
8.4 mPa.s (@ 20°C).
9.2. Other information
VOC = volatile organic
compounds
360 g/l
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability