Certifications 2

Individual protection measures, such as personal protective equipment
Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
General information
Wear safety glasses with side shields (or goggles). Use eye protection conforming to EN 166.
Eye/face protection
Skin protection
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough
time of the glove should be longer than the total duration of product use. If work lasts longer than
the breakthrough time, gloves should be changed part-way through. Full contact: Glove material:
nitrile. Use gloves with breakthrough time of 480 minutes. Minimum glove thickness 0.38 mm.
- Hand protection
Wear appropriate chemical resistant clothing.
- Other
In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator with
organic vapour cartridge and full facepiece. (Filter type AX)
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
Hygiene measures
Inform appropriate managerial or supervisory personnel of all environmental releases. Emissions
from ventilation or work process equipment should be checked to ensure they comply with the
requirements of environmental protection legislation. Fume scrubbers, filters or engineering
modifications to the process equipment may be necessary to reduce emissions to acceptable
levels.
Environmental exposure
controls
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Liquid.
Physical state
Aerosol
Form
Colourless.
Colour
Solvent.
Odour
Melting point/freezing point
-129.7 °C (-201.5 °F) estimated
Boiling point or initial boiling
point and boiling range
Not available.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.5 % estimated
Flammability limit - upper
(%)
7.8 % estimated
Flash point
< 0 °C (< 32.0 °F) Closed cup
Auto-ignition temperature
> 200 °C (> 392 °F)
Decomposition temperature
Not available.
pH
Not applicable.
Solubility(ies)
Solubility (water)
Insoluble in water
Vapour pressure
3645.9 hPa estimated
Vapour density
Not available.
Relative density
0.67 g/cm3
Relative density temperature
20 °C (68 °F)
Not available.
Particle characteristics
9.2 Other safety characteristics
Chemical family
Cleaner
Not explosive.
Explosive properties
Heat of combustion (NFPA
30B)
17.17 kJ/g estimated
Not oxidising.
Oxidising properties
VOC
700 g/l
SECTION 10: Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
10.1. Reactivity
SDS UK
Material name: Contact Cleaner Plus - Manufacturers
BDS002284AE Version #: 01 Issue date: 23-April-2021
5 / 11