Manual

Table Of Contents
page 21 of 720
BIOREMEDIATING parts washing system
SmartWasher
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
7.1.4. Model SW-37
1.
Remove the OzzyMat
®
from its package, unfold
it and lay it on the mat support grid located in
the lowest level in the sink. Make sure to lay the
OzzyMat
®
white side up.
2. Place the false bottom in position in the sink.
3.
Form the flexible nozzle to its desired shape and be
sure that the parts brush is inside the sink
4.
DO NOT PLUG UNIT IN BEFORE ADDING
OZZY JUICE
®
5. At start up, carefully add ± 95 liter of OzzyJuice
®
to the SmartWasher
®
by slowly pouring the solution
directly into the sink.
6.
Plug the unit into a 220 VAC GFCI electrical outlet
7.
The SmartWasher
®
will take approximately four
hours to heat up to its selected optimal temperature
of 40°C (± 1°) or 46°C (± 1°). This temperature
will be maintained as long as the SmartWasher
®
is
plugged in and full of OzzyJuice
®
. If the “Add Fluid
light is on, the heater automatically shuts o.
32981 Plastic basket
33047
False bottom
32950
Multi-Layer
OzzyMat FL-4
33076
Mat support grid
33075
Drain basket 3 1/2"
Stainless steel