Manualshelf

Manual

ManualsBrandsCRC ManualsCare Products & LubricantsStationary parts & brake cleaner SW-37 1 pc(s)
12345678910
Table Of Contents
page 5 of 720
BIOREMEDIATING parts washing system
SmartWasher
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
5. Safety instructions
a.
Use SmartWasher
®
only as described in this manual.
Use only attachments, parts and tools recommended
by the manufacturer.
b.
The equipment may only be installed, used, maintained
and repaired by adult (> 18 years), professional, trained
and/or qualified personnel
c.
The equipment must be used indoor, protected
against deleterious environmental conditions (e.g.
extreme low/high temperatures, rain, snow, wind,
lightning, …)
d. Suciently lighting and ventilation must be foreseen
by the user during use, maintenance and repair.
e.
The parts to be cleaned must have an appropriate
shape, dimension and weight in relation to the equip-
ment. Respect therefore the maximum load capacity
of the parts to be cleaned, as indicated in part 4 of
this user instruction manual.
f.
The SmartWasher
®
may not be used in explosive at-
mospheres (ATEX environments), confined spaces, ...
g.
The equipment may only be maintained and repaired
after the equipment has been unplugged from the
main power supply and after the equipment is cooled
down to ambient temperatures. Care must be taken
as burns can occur from touching hot parts.
h.
The SmartWasher
®
may only be used for cleaning in a
closed position, with all quick disconnect pins in firmly
place. (see chapter 7.1 of this user instruction manual).
i. The overfill protection on the SmartWasher
®
may
never be blocked. The overfill protection may not be
connected to the sewage system of your company.
j. Care must be taken to the ergonomic position of
the operator in relation with the dimensions of the
equipment during use.
k. Care must be taken to the environment where the
equipment is installed. It must be kept free from
surrounding obstacles and greasy underground as
this may lead to slipping, tripping or falling.
l. Do not operate SmartWasher
®
with damaged elec-
trical cable or if the equipment has been dropped
or damaged until it has been examined by a qualified
service person.
m.
Tools or parts, showing damage or wear, must be
instantly replaced or repaired before further use.
n. Do not let an electrical cable hang over the edge of
the table, bench, or counter or come in contact with
hot manifolds or moving fan blades.
o. If an extension electrical cable is necessary, a cable
with a current rating equal to or more than that of