Manualshelf

Manual

ManualsBrandsCRC ManualsCare Products & LubricantsStationary parts & brake cleaner SW-37 1 pc(s)
12345678910
Table Of Contents
page 8 of 720
BIOREMEDIATING parts washing system
SmartWasher
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
PARTS WASHER OPERATION BRAKE WASHER OPERATION
1. The pump switch is attached to a ten minute timer.
Turning the switch “ON” (upward position) will start
fluid flowing for ten minutes. To restart the flow, turn
the switch “OFF” then “ON” again and the flow will
restart for another ten minutes.
2.
Adjust the valve at the base of the nozzle to control
the flow of the fluid through the nozzle. The valve
at the base of the brush hose controls the flow of
fluid through the brush. Both outlets can be operated
independently or together.
1.
Unplug the SmartWasher
®
from the electrical outlet,
roll up the power cable and secure it with the strap
on the handle.
2. Roll the SmartWasher
®
to the vehicle and position
it under the brake you desire to clean.
3. Plug in the power cable and begin cleaning.
4.
When finished, unplug the power cable and secure it
with the strap on the handle. Roll the SmartWasher
®
back to its original spot and plug the power cable
into the appropriate outlet.