Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
SOLDABSORB
Creationdate :
29.06.17 Version : 2.0
Ref.Nr.:
UDS000412_3_20170629 (EN)
Replaces:
UDS000412_20170314
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Hazardous ingredient
CAS-nr.
method
National established exposure limits, United Kingdom
Copper
7440-50-8
TWA
1 mg/m3 (dust)
STEL
2 mg/m3 (dust)
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN
374).
The breakthrough time of the glove should be longer than the total duration
of product use. If work lasts longer than the breakthrough time, gloves
should be changed part-way through.
eyes :
Wear safety eyewear according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Solid.
colour :
Copper.
odour :
Odorless.
pH :
Not applicable.
Boiling point/range :
Not applicable.
Flash point :
Not applicable.
Evaporation rate :
Not applicable.
Explosion limits : upper limit :
Not applicable.
lower limit :
Not applicable.
Vapour pressure :
Not applicable.
Relative density :
Not applicable.
Auto-ignition :
Not applicable.
Viscosity :
Not applicable.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability