Datasheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
MARKERPEN
Creationdate :
29.06.17 Version : 3.0
Ref.Nr.:
BDS000914_3_20170629 (EN)
Replaces:
BDS000914_20150407
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
Paints
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
o-xylene [1]
95-47-6
TWA
50 ppm
STEL
100 ppm
8.2. Exposure controls
Control procedures :
Use only outdoors or in a well-ventilated area.
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Do not breathe aerosols or vapours.
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
recommended respiratory protection:
Air purifying respirator equiped with organic gas/vapor cartridge (type A)
hands and skin :
When handling the product wear chemical-resistant gloves (standard EN 374).
The breakthrough time of the glove should be longer than the total duration of
product use. If work lasts longer than the breakthrough time, gloves should be
changed part-way through.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Liquid.
colour :
White.
odour :
Aromatic.
pH :
Not applicable.
Boiling point/range :
> 100 °C
Flash point :
25 °C (Closed Cup)
Evaporation rate :
Not available.
Explosion limits : upper limit :
Not available.
lower limit :
Not available.
Vapour pressure :
Not available.
Relative density :
0.9 Not available.
Solubility in water :
Insoluble in water
Auto-ignition :
> 200 °C
Viscosity :
Not available.