Datasheet
Manufactured by :
CRC Industries Europe NV
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
1/2
CRC ROST FLASH
Ref. : 10526
1. GENERAL DESCRIPTION
Quick acting penetrating oil with freeze effect.
A no compromise product that destroys the structure of rust and corrosion by thermal shock.
The created fissures allow a fast penetrating of the oil through the oxides and soil to free
corroded fasteners and mechanical components.
2. FEATURES
• Cracks the layer of rust and dirt by means of a big thermal shock (down till -40°C)
• Penetrates quickly into hard-to-reach areas.
• Frees metal parts seized by dirt, rust, corrosion or dried-up greasy deposits.
• Eases quick disassembly of mechanical components, fittings, assemblies, nuts and bolts
and other close tolerance fasteners.
• Lowers maintenance costs.
• Reduces scrap rate of seized parts.
• Does not contain silicones.
• Safe for all metals and for most plastics and rubbers (if in doubt, on-the-job testing prior to
use is advised).
• Aerosols are equipped with the 360° (upside-down) spray valve and extension tube for
added convenience.
3. APPLICATIONS
• Seized and rusted nuts and bolts
• Locks and hinges
• Screwed parts
• Equipment disassembly
• Corroded fasteners
• Valves
• Air tools
• Chains and conveyors
• Agricultural equipment
4. DIRECTIONS
• Take away most of the loose dirt.
• Apply liberally, from a short distance, saturating problem areas.
• Use extension tube for hard-to-reach areas.
• Allow a few minutes for penetration.
• If necessary, for stubborn joints, fasteners and assemblies, repeat after 2 minutes.
• If wanted, the excess of Rost Flash can be removed with CRC Quickleen.
• A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.