User Manual

2
ADAT and Z-Link interfaces ''A'' correspond to analog channels 1-8;ADAT and
Z-Link interfaces ''B'' correspond to analog channels 9-16.
The analog inputs and outputs are balanced and can be configured, by group,
to professional or consumer levels with 4 DIP switches (rear of the unit).
The Synchronization button selects the clock source for the sample rate. In
Master mode, the Sample Rate button selects the desired sample rate. In
Slave mode, the sample rate is indicated here, and the Sample Rate button is
used to switch between S-Mux and normal operation. In normal operation, all
sample rates less than 50kHz are indicated.
A16 Ultra as Word Clock Master
When the is green, the is operating in mode.Master LED A16 Ultra Master
The sampling frequency used by the analog-to-digital (ADC) and digital-to-
analog (DAC) converters is derived from a highly stable internal clock
generator. Using the Sample Rate button, the sample rate can be set to 32kHz,
44.1kHz, 48kHz, 88.2kHz or 96kHz. A sample clock signal is available at the
Word Clock Out BNC connector on the rear of the unit. This signal is used to
synchronize additional external devices to the sample clock.
If the unit is operating in Master mode at 88.2kHz or 96kHz, the ADAT
interfaces switch automatically to S-Mux. In this case, ADAT A corresponds to
analog channels 1-4, andADAT B to channels 9-12.
1
A16Ultra
The , following in the tradition of the successful A16 converter, is a
very compact multi-channel 24bit/96kHz AD/DA-converter offering
uncompromising audio quality. It combines the qualities that made its
forerunner so popular with today's latest audio technology.
A16 Ultra
The simultaneously converts 16 analog audio channels to digital
and 16 digital channels to analog. The digital interfacing is provided through
two ADAT or two Z-Link interfaces. An additional slot is reserved for possible
future options, which might become available at a later stage.
A16 Ultra
An automatic memory function stores the current settings when you switch the
unit off, so you can get back to work quickly and easily when you resume your
session.
Not only because of its audiophile quality, but also because of its flexibility and
expandability, the will prove itself daily to be a perfect fit for your
professional studio.
A16 Ultra
The front panel contains the power switch, two buttons (Synchronization and
Sample Rate) and 11 light emitting diodes (LEDs) to indicate the device status.
It also contains the 16 five-segment level indicators for precise analog input
calibration.
When switched on, the green power LED indicates that the unit is operational.
Controls