Installation guide

FlipTop Basic Crestron FT-600
Mounting Plate Installation
Screws (4) #10-32 x 2”
(2037109)
Mounting Plates (2)
(2036985)
Mounting Surface
3. Slide the mounting plates over the studs on each side of the FT-600.
4. Turn the four #10-32 socket screws equally, until they contact the underside
of the mounting surface.
NOTE: Do not overtighten the #10 screws as this may damage the surface
or the unit.
12 • FlipTop Basic: FT-600 Operations & Installation Guide – DOC. 7596C