Use and Care Manual

Step 3: Click “Update” to begin.

Step 4: Your Cricut machine’s ﬁrmware will begin the updating process. A progress bar will appear on

the screen and your machine’s power button will turn red, indicating that an update is in progress.

Please do not disconnect the machine.

Section 10B

Firmware Update

Manual Firmware Update

Tip: If the connection with your machine is lost during a ﬁrmware update, make sure your machine is

connected to your computer and powered on. You may need to restart the process by manually

updating the ﬁrmware in Design Space®. Click “Retry” to start the process again.

Section 10B Page 2