Use and Care Manual

Section 13A
Smart Set Dial
Section 13A Page 2
Setting up
Fabric: Use for light-weight cotton or cotton/polyester fabrics which have been backed with an
iron-on adhesive interfacing. (Fabric backing required to cut fabrics.)
Fabric +: (The setting on the dial between fabric and poster board) Use for mid-weight fabrics which
have been backed with an iron-on adhesive interfacing. The setting will perform a multi-cut, meaning
it will cut more than once along the same lines.
(Fabric backing required to cut fabrics.)
Poster board: Use for heavier materials, such as display board used for signs or school projects.
Poster board +: (The setting on the dial between poster board and custom) Use for heavier display
boards. The setting will perform a multi-cut, meaning it will cut more than once along the same lines.
Tip: For an optimal cutting experience, we recommend using the Cricut
®
Deep Cut Blade when cutting
thicker materials such as heavy fabric, poster board, chipboard, magnet board, and leather. The deep
cut blade can cut most materials up to 2mm in thickness using the multi-cut feature.