Use and Care Manual

Section 13D Page 1
Step 1 Begin by inserting a simple image to use as a test cut while you identify the setting.
Tip: A heart is a good shape to test with because the image has both curves and points that will need to
be cut.
There are over 50 pre-loaded custom materials in Cricut Design Space
™
. If you have a material you
would like to cut and it is not on the list, you can add it by creating your own custom setting.
Step 2 Set the image size in the Edit panel to about 2.5”. This is a good test size for most materials.
Section 13D
Smart Set Dial
Creating your own custom settings