PART LIST Leg Top Shelf Frame Shelf Frame | Top Glass Shelf Glass Shelf 4 PCS 1PC PCS 1PC PCS HARDWARE LIST Bolt Allen Wrench | Safety Strap Kit 25 PCS (Extra 1) 1PC 1 Set ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly.
Step 1. Lay 2 legs (part A) down on a flat surface, such as carpet, as shown below. Insert top shelf frame (part B) and shelf frames (part C) into brackets of legs (part A). Attach remaining 2 legs (part A) by inserting brackets into top shelf frame (part B) and shelf frames (part C). Step 2. Attach top shelf frame (part B) and shelf frames (part C) to the legs (part A) using bolts {part #1) and Allen wrench (part #2). NOTE: Please do not fully tighten bolts until all of them are in place.
@ 1 D172" SAFETY STRAP KIT| WALL ANCHOR SCREW BOLT SAFETY WALL STRAP 18ET 1PC 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1. Attach hook (B) to prevailed hole in top shelf frame (part B ). Using bolt (D) and a fillips head screwdriver. 2. Drill a 11/32" hole in the wall where this unit will be secured.