PART LIST Top Panel Middle Frame Bottom Panel Side Frame Left Partition Panel 1PC 1PC 1PC PCs 1PC Right Partition Shelf Drawer Partition Door Panel Adjustable Shelf Panel Panel 1PC PCS 1PC PCS 1PC Top Rail Drawer Front Drawer Side Drawer Bottom Towel Bar Panel Panel Panel PCS 4 PCS 4 PCS PCS PCS
HARDWARE LIST 210*50mm ©8*30mm ©6*30mm 1mm Large Wood Medium Wood Small Wood Flat Head Short Bolt Dowel Dowel Dowel Screw 1PC 26 PCS (Extra 1) 8 PCS (Extra 1) 4 PCS 20 PCS (Extra Long Bolt Barrel Nut Flat Washer Spring Washer Double Magnet 14 PCS (Extra 1) | 6 PCS (Extra 1) | 12 PCS (Extra 1) [12 PCS (Extra 1) PCS 12*33*D6mm Round Head Shelf Holder | Round Head Bolt Handle Allen Wrench Screw 4 PCS 4 PCS 12 PCS 6 PCS 1PC ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during as
Please do not use tools to assemble this unit unless specifically indicated. Unlocked Locked Reference the images above any time the instructions state "lock the hardware”. Note: Be sure to check all hardware is locked when completed. Step 1. Attach handles (part #14) to drawer front panels (part L) and door panels (part I) using round head bolts (part #13) and fillips head screwdriver. Attach towel bars (part O) to side frames (part D) using short bolts (part #5) and Allen wrench (part #15).
Step 2. Attach double magnets (part #10) to partition panels (parts E & F) using round head screws (part #11) and fillips head screwdriver. Attach drawer partition panel (part H) to middle frame (part B) using medium wood dowels (part #2), short bolts (part #5) and Allen wrench (part# 15). Step 3. Attach drawer side panels (part M) to drawer front panel (part L) using small wood dowels (part #3) and lock the hardware. Slide drawer bottom panel (part N) into grooves of assembled unit (parts L & M).
Step 4. Attach shelves (part G) to partition panels (parts E & F) using medium wood dowels (part #2) and lock the hardware. Attach assembled units (parts bottom panel (part C) using medium wood dowels (part #2), long bolts (part #6), barrel nuts (part #7) and Allen wrench (part #15). Step 5. Attach assembled unit (parts partition panels (parts E & F) using medium wood dowels (part #2), short bolts (part #5) and Allen wrench (part #15).
Step 6. Place top rails (part K) on drawer partition panel (part H). Attach side frame (part D) to assembled unit (parts using medium wood dowels (part #2), flat washers (part #8), spring washers (part #9), long bolts (part #6), Allen wrench (part #15) and lock the hardware. "Q\/ Step 7. Attach side frame (part D) to assembled unit (parts using medium wood dowels (part #2), flat washers (part #8), spring washers (part #9), long bolts (part #6), Allen wrench (part #15) and lock the hardware.
Step 8. Carefully turn unit upright. Attach top panel (part A) to assembled unit (parts using medium wood dowels (part #2), flat head screws (part #4), flat washers (part #8), spring washers (part #9), short bolts (part #5), Allen wrench (part #15) and fillips head screwdriver. Step 9. Place shelf holders (part #12) into desired position and then slide adjustable shelf (part J) into place.
Step 10. Attach door panels (part I) by placing bottom pin hinges (per-installed in door) in the per-drilled holes of bottom panel (part C). Then depress the top spring loaded pin hinge so it can be placed in the per-drilled holes of top rail (part K). NOTE: Be sure top and bottom pin hinges are fully extended to secure doors in place. Step 11. Slide assembled drawers into place.