Breakfast Bar CF4404
PART LIST A B Top Panel 1 PC D C Right Leg 1 PC Left Leg 1 PC E Side Rail 1 PC Middle Rail 1 PC F Side Cabinet 1 PC HARDWARE LIST #1 #2 #3 1-1/4”*Ø1/4”*D12mm 1-1/2”*Ø1/4”*D12mm 2-1/2”*Ø1/4”*D12mm Small Bolt 6 PCS (Extra 1) Medium Bolt 2 PCS (Extra 1) Long Bolt 6 PCS (Extra 1) #6 Wood Dowel 10 PCS (Extra 1) #4 #5 Spring Washer 14 PCS (Extra 1) Flat Washer 14 PCS (Extra 1) #7 Allen Wrench 1 PC Note: Wood dowels are intended for alignment.
Step 1. Lay top panel (part A) upside down on a soft surface, such as carpet, as shown below. Attach side cabinet (part F) to top panel (part A) using wood dowels (part 6), small bolts (part #1), spring washers (part #4), flat washers (part #5) and allen wrench (part #7). NOTE: Please do not fully tighten bolts untill unit is fully assembled. F #7 #1 #4 #5 A #6 #6 #6 #1 x3 #4 x3 #5 x3 #6 x2 #7 x1 Step 2.
Step 3. Attach middle rail (part E) to side cabinet (part F) using wood dowels (part 6), medium bolt (part #2), spring washer (part #4), flat washer (part #5) and allen wrench (part #7). NOTE: Please do not fully tighten bolts untill unit is fully assembled. #6 #7 E #5 F #4 #2 A #2 x1 #4 x1 #5 x1 #6 x2 #7 x1 Step 4. Attach legs (parts B & C) to side rail (part D) using wood dowels (part #6), long bolts (part #3), spring washers (part #4), flat washers (part #5) and allen wrench (part #7).
Step 5. Attach the assembled unit (parts B & C & D) to top panel (part A) and middle rail (part E) using wood dowels (part 6), medium bolt (part #2), long bolts (part 3), spring washers (part #4), flat washers (part #5) and allen wrench (part #7). NOTE: Please fully tighten all bolts at this time.
Step 6. Carefully turn unit upright.