Media Console Sideboard CF4217
PART LIST A B Top Panel 1 PC F Bottom Panel 1 PC K Adjustable Shelf 2 PCS L P Q Drawer Back Panel 3 PCS I Top Front Rail 1 PC M Right Door 1 PC Left Door 1 PC Drawer Bottom Panel 3 PCS E Right Panel 1 PC Left Panel 1 PC H G Right Center Panel 1 PC D C J Drawer Front Rail 2 PCS N Drawer Front Panel 3 PCS Left Center Panel 1 PC Left Drawer Panel 3 PCS Back Rail 2 PCS O Right Drawer Panel 3 PCS R S T Right Back Panel 1 PC Left Back Panel 2 PCS Drawer Support 3 PCS 2
HARDWARE LIST #1 #2 #3 Ø1/4" x L2" Ø1/4" x L19/32" Screw 8 PCS (Extra 1) Bolt 4 PCS (Extra 1) #6 #7 #4 Ø5/32" x L1 1/2" #9 #12 2/8" Big Hinge 2 PCS Small Hinge 2 PCS #13 #14 5 7/8" Shelf Support 8 PCS Side Leg 4 PCS #10 7/8" Ø8 x L25mm #11 Ø1/8" x L5/8" Long Screw Short Screw Cam Lock 15 PCS (Extra 1) 40 PCS (Extra 2) 29 PCS (Extra 2) #8 Wood Dowel Cam Bolt 29 PCS (Extra 2) 40 PCS (Extra 2) #5 Back Bracket 4 PCS #15 5/32" Center Leg 2 PCS Allen Wrench 1 PC Safety Strap Kit
Step 1. Attach cam bolts (part #6) to panels (parts A, C, D, F & M) using phillips head screwdriver. Note: Do not overtighten cam bolts. Stop tightening once threads on cam bolt are no longer visible. #6 #6 x3 #6 #6 #6 #6 #6 M #6 C #6 #6 #6 A #6 #6 #6 #6 #6 #6 #6 #6 D #6 #6 #6 #6 F #6 #6 x 29 Step 2. Attach legs (parts #12 & #13) to bottom panel (part B) using bolts (part #2), short screws (part #4), allen wrench (part #14) and phillips head screwdriver.
Step 3. Attach drawer panels (parts N & O) to drawer front panel (part M) using wood dowels (part #7) and cam locks (part #5). Slide drawer bottom panel (part Q) into grooves of assembled unit (parts M, N & O). Attach drawer support (part T) to drawer front panel (part M) using wood dowel (part #7) and cam lock (part #5). Attach drawer back panel (part P) to assembled unit (parts N, O, Q & T) using wood dowel (part #7), long screws (part #3) and phillips head screwdriver. Repeat for remaining drawers.
Step 5. Insert right back panel (part R) into grooves of assembled unit (parts F & J). J R J I F Step 6. Attach right panel (part D) to assembled unit (parts I & J) using wood dowels (part #7) and cam locks (part #5). NOTE: Cam locks must rotate a full 180°. See pictured insert.
Step 7. Attach top front rail (part H) to assembled unit (parts D & F) and left panel (part C) using wood dowels (part #7) and cam locks (part #5). NOTE: Cam locks must rotate a full 180°. See pictured insert. #6 #7 I point arrow on cam lock toward adjacent hole D #5 H #5 turn clockwise to fasten J R F #7 #5 J C #5 #7 x2 x2 Step 8. Attach top panel (part A) to assembled unit (parts C, D, F & H) using wood dowels (part #7) and cam locks (part #5). NOTE: Cam locks must rotate a full 180°.
Step 9. Attach left center panel (part E) to top panel (part A) using wood dowels (part #7) and cam locks (part #5). NOTE: Cam locks must rotate a full 180°. See pictured insert. #6 point arrow on cam lock toward adjacent hole I D #5 H turn clockwise to fasten J A R F #7 #5 #7 J #5 C E #5 #7 x2 x2 Step 10. Carefully turn unit upside-down. Insert left back panels (part S) into grooves of assembled unit (parts A, C, E & F).
Step 11. Attach bottom panel (part B) to assembled unit (parts C, D, E & F) using wood dowels (part #7), screws (part #1) and allen wrench (part #14). #7 B #7 J R #7#7 J D I #14 #1 S F #7#7 B #7 S #7 E A C H #1 #7 #14 x8 x8 x1 Step 12. Carefully turn unit upright. Secure back brackets (part #10) at the corner of left back panels (part S) using short screws (part #4) and phillips head screwdriver.
Step 13. Place shelf supports (part #11) into desired position and slide adjustable shelves (part G) into place. C A G E G F B D C, E & F #11 I G #11 C&E E&F #11 x8 Step 14. Attach big hinges (part #8) to left door (part K) and small hinges (part #9) to right door (part L) using short screws (part #4) and phillips head screwdriver. Attach doors (parts K & L) to panels (parts C & F) using short screws (part #4) and phillips head screwdriver.
Step 15. Slide assembled drawers into place. Note: It is important to adjust levelers once fully assembled and upright. Extend adjustable leveler until it's firmly in contact with the floor. If relocating, adjust leveler as needed until it's firmly in contact with the floor in new Iocation. Important: Safety strap kit (part #15) must be installed to prevent tipping, damaged and/or injury.
A #15 B Washer 4 PCS Safety Strap Kit Wall Anchor 1 SET 2 PCS D C E Ø1/8" x L5/8" Ø5/32" x L1 1/2" Short Screw 2 PCS Long Screw 2 PCS Safety Wall Strap 2 PCS SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1. Insert short screw (C) through washer (B) and safety wall strap (E) and attach to top panel (part A) using phillips head screwdriver. 2. Drill a 11/32" hole where you want to secure the unit.
