Outdoor Wicker Sofa CO7169
PART LIST C B A Right Arm Panel 1 PC D Left Arm Panel 1 PC Seat Panel 1 PC F Seat Cushion 3 PCS HARDWARE LIST #2 #1 M6*35mm #3 M6mm Bolt Flat Washer 12 PCS (Extra 2) 12 PCS (Extra 2) M6mm Allen Wrench 1 PC 2 E Back Panel 1 PC Back Cushion 3 PCS
Step 1. Lay right arm panel (part A) upside down on a soft flat surface, such as carpet, as shown below. Attach seat panel (part C) to right arm panel (part A) using bolts (part #1), flat washers (part #2) and allen wrench (part #3). NOTE: Please do not fully tighten bolts until unit is fully assembled. #3 #1 #2 C A #1 x3 #2 x3 #3 x1 Step 2. Attach back panel (part D) to right arm panel (part A) and seat panel (part C) using bolts (part #1), flat washers (part #2) and allen wrench (part #3).
Step 3. Attach left arm panel (part B) to back panel (part D) and seat panel (part C) using bolts (part #1), flat washers (part #2) and allen wrench (part #3). NOTE: Please fully tighten all bolts at this time. B D C #2 #1 #3 #1 x4 #2 x4 #3 x1 Step 4. Carefully turn unit upright. Add seat cushions (part F) and back cushions (part E) as shown below.
