Instructions / Assembly

Step 6. Attach Stem Ware Holders (Parts B & C) to Expandable Top A with Wood Dowels and 1 ½"
Screws (Part #14) using Phillips Head screwdriver as shown. Note: Pay close attention to
positioning of Parts B & C. Stem Ware Holder B is an L shaped part. Holder C is a T
shaped part. DO NOT OVER TIGHTEN SCREWS!
Step 7. Attach Expandable Top A to Parts D, E, F, & I with Wood Dowels & Cam Locks as shown.
Secure Rail X to Expandable Top A with Screws (Part #4) using Phillips Head screwdriver
as shown.
8 of 15