Outdoor Wicker Bar Stool CO7165
PART LIST A Back Panel 1 PC F D C B Seat Panel 1 PC Left Stretcher 1 PC E Right Stretcher 1 PC Front Leg 1 PC G * Please note cushion cover will ship separately.
Step 1. Lay back panel (part A) down on a soft flat surface, such as carpet, as shown below. Attach seat panel (part B) to back panel (part A) using long bolts (part #2), flat washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. B #4 #2 #3 A #2 x4 #3 x4 #4 x1 Step 2. Attach left stretcher (part C) and right stretcher (part D) to back panel (part A) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
Step 3. Attach front leg (part E) to assembled unit (parts B,C & D) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. E B A #3 D C #3 #1 #4 #1 #4 Step 4. Insert core of seat cushion (part G) into cover of seat cushion (part F).
Step 5. Carefully turn the stool upright and place seat cushion on the stool.
