Instructions / Assembly

A
B
D
#
1
#
3
#
4
C
Step 1. Lay back panel (part A) down on a soft flat surface, such as carpet, as shown below. Attach
seat panel (part B) to back panel (part A) using long bolts (part #2), flat washers (part #3)
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#3
x4
#4
x1
#2
x4
#2
#3
#4
A
B
Step 2. Attach left stretcher (part C) and right stretcher (part D) to back panel (part A) using
short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#1
x4
#3
x4
#4
x1
3
and allen wrench (part #4).