Specifications

8 16026784 © 2005 Maytag Services
Specifications
Refer to individual Technical Sheet for specification
information.
Placement of the Oven
This freestanding range must be placed in the kitchen or
comparable room. All safety guidelines must be followed
(see Chapter 2) and free air flow around the range is
essential.
Do Not Block Air Vents
All air vents must be kept clear during cooking. If air
vents are covered during operation, the oven may
overheat. If this occurs, a sensitive, thermal safety device
automatically removes power to the oven, rendering the
oven inoperable. The oven will remain in this state until it
has sufficiently cooled.
Location of Model Number
To request service information or replacement parts, the
service center will require the complete model, serial, and
manufacturing number of your freestanding range. The
number can be found on the oven chassis behind the
service drawer. Open the service drawer to view the
data.
Model
Number
General Information
Grounding Instructions
This appliance must be grounded. If an electrical short
circuit occurs, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
The cord for this appliance has a grounding wire with a
grounding plug. Put the plug into an outlet that is properly
installed and grounded.
WARNING
!
To avoid risk of electric shock, personal injury or death,
use grounding plug properly.
Ask a qualified electrician if you do not understand the
grounding instructions or if you wonder whether the
appliance is properly grounded.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
For a permanently connected appliance: This appliance
must be connected to a grounded, metallic, permanent
wiring system, or an equipment grounding conductor with
circuit conductors, and connected to the equipment
grounding terminal or lead on the appliance.
WARNING
!
Attaching adapter ground terminal to wall receptacle
cover screw does not ground appliance unless the
cover screw is metal and not insulated, and wall
receptacle is grounded through the house wiring.
Consumer should have circuit checked by a qualified
electrician to verify receptacle is properly grounded.
Model Identification
Complete enclosed registration card and promptly return.
If registration card is missing:
• For Amana product call 1-800-843-0304 or visit the
web site at www.amana.com
• For Maytag product call 1-800-688-9900 or visit the
web site at www.maytag.com
• For product inCanada call 1-866-587-2002 or visit the
web sites at www.maytag.com or www.amana.com
When contacting Maytag service, provide product
information located on rating plate. Record the following:
Model Number: ___________________
Manufacturing Number: ___________________
Serial or S/N Number: ___________________
Date of purchase: ___________________
Dealer’s name and address: ___________________
Service
Keep a copy of sales receipt for future reference or in
case warranty service is required. To locate an authorized
servicer:
• For Amana product call 1-800-628-5782 or visit the
web site at www.amana.com
• For Maytag product call 1-800-462-9824 or visit the
web site at www.maytag.com
• For product inCanada call 1-866-587-2002 or visit the
web sites at www.maytag.com or www.amana.com
Warranty service must be performed by an authorized
servicer. We also recommend contacting an authorized
servicer, if service is required after warranty expires.
Parts and Accessories
Purchase replacement parts and accessories over the
phone. To order accessories for your product:
• For Amana product, call 1-877-232-6771 or visit the
web site at www.amana.com
• For Maytag product, call 1-800-462-9824 or visit the
web site at www.maytag.com
• For product inCanada call 1-866-587-2002 or visit the
web sites at www.amana.com or www.maytag.com