User's Manual

ManualsBrandsCrown Audio ManualsAmplifiersDCI 4|1250ND DriveCore Install 4-Channel 1250W Network Display Amplifier with AVB

DriveCore Install Network Series Power Ampliﬁers

Operation Manual

page 22

Bridge Mono Operation

The DriveCore Install ampliﬁer outputs can be bridged to increase the power and voltage available at the output of the ampliﬁer. The ampliﬁer can be bridged in the Ampliﬁer

Mode window. By selecting the bridging option, only the ﬁrst input channel will need to be wired. (See Figure 17). Low-Z and High-Z options are still available.

NOTE:If the ampliﬁer output is in bridge mono and the High-Z option is selected, the ampliﬁer will produce 140Vrms or 200Vrms.

Set-up and System Conguration

NOTE: By selecting Mono Bridge output, only one channel in the channel pair DSP will be available (See Figure 17).

Figure 17

Figure 18