User's Manual

ManualsBrandsCrown Audio ManualsAmplifiersDCI 4|1250ND DriveCore Install 4-Channel 1250W Network Display Amplifier with AVB

DriveCore Install Network Series Power Ampliﬁers

page 35

Operation Manual

BLU link

Figure 32 BLU link Input Channel Assignment

BLU link Routing

Double-clicking on the BLU link Routing button opens the BLU link channel assignment dialogue. The DCi-N ampliﬁers have 8 'slots' (labeled A through H) available for

receiving a BLU link audio stream, which can then be sent to any one of the channels in the ampliﬁer via the Source Routing panel. Click and drag a stream from the list

of BLU link channels on the left, and drop it into one of the 8 channel slots (A-H) available on the right side of the dialogue labeled Output Channels. Then go to Source

Routing to assign that audio stream to an ampliﬁer channel by selecting BLU link Input A through H from the dropdown menus presented. If you know the BLU link channel

number you want to use, it can be assigned to a slot (A-H) on the Input Source Routing window by typing the BLU link channel number into the ﬁeld next to the desired

input slot letter. Press enter after entering the number for changes to take effect

Output Conﬁguration

Double-clicking on the BLU link Routing button opens the BLU link channel assignment dialogue. The DCi-N ampliﬁers have 8 'slots' available for receiving a BLU link

audio stream, which can then be sent to any one of the channels in the ampliﬁer via the Source Routing panel. Click and drag a stream from the list of slots on the left, and

drop it into one of the 8 channel slots available on the right side of the dialogue labeled Output Channels. Then go to Source Routing to assign that audio stream to an

ampliﬁer channel by selecting BLU link Input 1 through 8 from the dropdown menus presented.