User's Manual

DriveCore Install Network Series Power Amplifiers
page 59
Operation Manual
AC Power Draw and Thermal Dissipation
AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Data based on all channels driven.
DCi 2|2400N - Bridge
120 VAC / 60 Hz 230 VAC / 50 Hz
Condition Load
"Line
current
(amps)"
Power Dissipated as Heat "Line
current
(amps)"
Power Dissipated as Heat
watts BTU kcal/hr watts BTU kcal/hr
At Idle Awake N/A 1. 8 179 612 154 1. 6 201 685 173
1/8 Power
Pink Noise
Typical of program
material just at clip
4Ω 10.7 523 1785 450 6.4 545 1859 469
8Ω 7. 3 353 1204 304 4.3 367 1252 316
16Ω 4.5 239 817 206 2.8 260 888 224
140V (32.67Ω) 8.3 401 1367 345 4.9 433 1477 372
200V (66.67Ω) 8.3 362 1237 312 5.0 384 1310 330
1/3 Power
Pink Noise
Typical of program
material at
extreme clip
4Ω 23.6 881 3007 758 12.2 979 3341 842
8Ω 16.9 6 11 2085 526 9.3 568 1939 489
16Ω 9.2 286 975 246 5.0 331 1130 285
140V (32.67Ω) 18.2 688 2348 592 10.0 657 2243 565
200V (66.67Ω) 18.8 573 1954 493 10.5 584 1994 503
DCi 2|2400N - Dual
120 VAC / 60 Hz 230 VAC / 50 Hz
Condition Load
"Line
current
(amps)"
Power Dissipated as Heat "Line
current
(amps)"
Power Dissipated as Heat
watts BTU kcal/hr watts BTU kcal/hr
At Idle Awake N/A 1. 8 179 612 154 1. 6 201 685 173
1/8 Power
Pink Noise
Typical of program
material just at clip
2Ω 10.7 523 1785 450 6.4 545 1859 469
4Ω 7. 3 353 1204 304 4.3 367 1252 316
8Ω 4.5 239 817 206 2.8 260 888 224
70V (16.33Ω) 8.3 401 1367 345 4.9 433 1477 372
100V (33.33Ω) 8.3 362 1237 312 5.0 384 1310 330
1/3 Power
Pink Noise
Typical of program
material at
extreme clip
2Ω 23.6 881 3007 758 12.2 979 3341 842
4Ω 16.9 6 11 2085 526 9.3 568 1939 489
8Ω 9.2 286 975 246 5.0 331 113 0 285
70V (16.33Ω) 18.2 688 2348 592 10.0 657 2243 565
100V (33.33Ω) 18.8 573 1954 493 10.5 584 1994 503