Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 104
Fig. 4.43 The Drone Object Attributes Window
Fig. 4.44 The Aux Input Drone Container Attributes Window
4.15 Drone Objects
An IQ drone is an IQ component that can, among other things, enable an IQ System to function automatically
without an operator or host computer. This section will focus on just a description of the drone objects since Section
8 later in this manual provides a full description of a DRN-16 drone.
There are two types of drone objects: Drone Container objects and Drone Paralyze Button objects. To place a
drone object on a graphics plate, choose Drone Objects from the Toolbox. The Drone Object Attributes
window (Figure 4.43) will then open so you can configure it. Its attributes are described below.
Drone List: Selects the drone to which the drone object will be linked.
Object Type: Selects the type of drone object to be created.
Aux Input Container: Selects a Drone Container which is linked to a single AUX input of the drone. On/Off
Buttons and Drone Paralyze Buttons placed in the container will be automatically linked to the specified AUX
input of the drone. To configure the Aux Input Drone Container press the Setup button. The Attributes windows
shown in Figure 4.44 will open: