Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 107
Fig. 4.49 A Drone Container (Left) and Drone Paralyze Button (Right)
Paralyze Input: Selects a drone input to which the Paralyze Button will be linked.
AUX / Analog: Selects whether the input is an AUX input or an analog input.
When Paralyzed: Selects the type of commands that will be sent (if any) when the Paralyze Button is turned on.
The available commands will vary depending on whether an AUX or analog input is selected.
When Unparalyzed: Selects the type of commands that will be sent (if any) when the Paralyze Button in turned
off. The available commands will vary depending on whether an AUX or analog input is selected.
New Level: Sets the separate levels that will be sent when the Paralyze Button is on and off. This attribute is only
active when an analog input is selected and a Send New Level command is also selected.
On: Sets the button color when it is turned on.
Off: Sets the button color when it is turned off.
Important: To be operational, Drone Paralyze Buttons must be placed into an Aux Input Drone Container.
Setup: Opens the appropriate Attributes window for the Object Type selection (Figures 4.44 through 4.48).
Drone Container objects and Drone Paralyze Buttons look like typical containers and buttons as shown in Figure
4.49.