Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 109
Fig. 4.52 A Sample Plotter Object
Fig. 4.53 A Plotter Object with a Curve Object
Auto X Axis: Determines whether the scaling and annotation of the X axis is determined by the range of data to
be displayed.
Left X Axis: If the Auto X Axis attribute is turned off, this attribute determines the minimum X value to be plotted.
Right X Axis: If the Auto X Axis attribute is turned off, this attribute determines the maximum X value to be plotted.
Log X Axis: Determines whether the X axis should be scaled logarithmically. If this attribute is turned off, the X
axis will use a linear scale.
Auto Y Axis: Determines whether the scaling and annotation of the Y axis is determined by the range of the data
to be displayed.
Top Y Axis: If the Auto Y Axis attribute is turned off, this attribute determines the maximum Y value to be plotted.
Bottom Y Axis: If the Auto Y Axis attribute is turned off, this attribute determines the minimum Y value to be plotted.
The Plotter object looks like a large button as shown in Figure 4.52 below.
Figure 4.53 shows a plotter object with a single curve. The curve was added by dragging a Curve object on top
of the Plotter object.