Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 117
the list, first move the cursor to the model field and then press the “Space Bar” or E. The list shown in Figure
5.4 below will appear. Select the desired amplifier from the list and press “Space Bar”or
E again. Once
selected, the amplifier model and appropriate scale factors will be saved in the firmware of the IQ2 P.I.P.
Fig. 5.3 Available IQ2 P.I.P. Models List
Fig. 5.4 Amplifier Model List
Custom scale factors can also be entered using the User Defined selection. Contact Crown’s Technical Support
Group for additional information if you need to use this feature.
Location & Purpose: These two text lines are available for you to include relevant notes about the unit. You
can enter anything here up to 19 characters per line (upper case only) for legacy IQ P.I.P.s and up to 12
characters per line (upper and lower case) for IQ2 P.I.P.s.