Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 185
The following monitor functions are available for each IQ component:
Amplifier IQ P.I.P. without SmartAmp features:
DSPI—monitor the on/off state of the Data Signal Presence Indicator
AUX Out—monitor the on/off state of the AUX port output
Power—monitor the on/off state of the high voltage supply of each channel
Mute—monitor whether or not the audio signal has been muted
Polarity—monitor whether or not the polarity of the audio signal of each channel has been inverted
Amplifier IQ P.I.P.
with SmartAmp features (includes all the above commands plus):
IOC—monitor whether or not an IOC error occurs
ASA—monitor the on/off state of the ASA control
MPX-6 Mixer:
DSPI—monitor the on/off state of the Data Signal Presence Indicator
AUX—monitor the on/off state of the AUX port output
Bus—monitor the on/off state of the audio Bus output of each channel
SMX-6 & AMB-5 Mixers (includes all MPX-6 commands plus):
ASA—monitor the on/off state of the ASA control
MRX-24, 24S, 12, 12S:
DSPI—monitor the on/off state of the Data Signal Presence Indicator
AUX—monitor the on/off state of the AUX port output
Relay—monitor the on/off state of each relay
DRN-16:
AUX Input—monitor the on/off state of each logic input
Inverted: The Inverted command causes the logic output to switch “on” when the function being monitored
is “off” rather than “on.”