Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 197
Press X to exit the curve screen and return to the Sub-block screen. Note: Only one channel can be viewed
at a time.
11.2.3 Monitoring from a Graphics Plate
The most flexible way to monitor an SLM-8 is from a graphics plate where you can use a Plotter and one or more
Curve objects to create a custom graph. A sample is shown below in Figure 11.4.
Fig. 11.3 A Sample Impedance Curve
Fig. 11.4 A Sample Graphics Plate Plotter Object with Two Curves
More than one curve can be used with a single Plotter object as is shown in Figure 11.4 and more than one
channel can be viewed in a single Plotter object. And a graphics plate can contain more than one Plotter object.
(See Section 4.16 and 4.17 for instructions on using Plotter and Curve objects on a graphics plate.)