Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 51
7 Click ({) on the Display control to go to the new graphics plate. It will be empty, except for the background
picture (if one is used) and the Crown IQ logo in the lower right corner of the screen.
8 Press
A+g to open the graphics Plate Attributes window (Figure 3.7). Use the following descriptions
to help you configure the attribute settings.
Fig. 3.6 A Graphics Plate with a Stadium Picture in the Background
Fig. 3.7 The Graphics Plate Attributes Window
Snap to Object: Causes an object to automatically align itself with another object when it is placed in
very close proximity to it (within a few pixels). This attribute must be turned on for the autosize feature
discussed in Section 3.3.4 to work.
Snap to Grid: Causes objects that are moved to “snap” (jump) to a grid location defined by the Grid
Width and Grid Height attributes.