Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 66
Convert: Determines whether or not Turbo will attempt to match (convert) the color palette in the PCX image
with the one it uses.
After configuring these attributes, you can press the OK button. Do
not press the Save button—it and the Edit button
will be discussed later in Section 3.9.5. After pressing the OK button, a normal-looking container will appear.
Resize it to a size that is appropriate for your GDM. A sample is shown below with no PCX picture:
Objects that are placed into this GDM Container will be automatically linked to the IQ component it represents.
Fig. 3.25 A GDM Container
3.9.4 Adding Objects to the GDM Container
After the GDM Container has been created, it is time to add the other objects to it that will enable it to monitor and
control our amplifier. For this example, we chose to create the objects shown in Figure 3.26:
Fig. 3.26 The Unassembled Custom GDM
GDM Container
Pot objects
Bar Meter objects
Button objects
Text objects