Software Instruction Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 92
4.10 Spin Control
The Spin control object is used to control functions (usually multistate) that cannot be controlled by Pot or Button
objects. For example, a Spin control can be used to set a compression ratio. To place a Spin control on a graphics
plate, choose Spin Control from the Toolbox. The Spin Control Attributes window (Figure 4.29) will then open
so you can configure it. Its attributes are described below.
Component List: Selects the IQ component to which the Spin control will be linked. All IQ components that
appear in the control blocks and all IQ2 components whose UCODE (OIF file) is visible to Turbo will appear in this
list.
Function List: Selects the specific function that the Spin control will control. The function list will change to match
the IQ component selected in the component list.
Background: Sets the background color of the Spin control. The border is not affected by the background
color.
Text: Sets the text foreground color of the Spin control.
Channel: Selects the channel which the Spin control will affect. This attribute will not be available for some IQ
components and some functions.
Input: Selects the input which the Spin control will affect. This attribute will not be available for some IQ
components and some functions.
Border: Causes the Spin control to use a three-dimensional border that gives the Spin control a raised
Fig. 4.29 The Spin Control Attributes Window