User's Manual

XLi Series Power Ampliﬁers

page 7

Operation Manual

Bridge-Mono Wiring Using the Speakon

Connectors

Bridge-mono mode doubles the output power of the ampliﬁer.

1. See Figure 5. On the back panel, set the Output Mode Switch to BRIDGE.

2. Wire the speaker to the Speakon

connector as shown.

3. Only the Channel 1 Gain Control works in Bridge-mono mode.

Bridge-Mono Wiring Using the Binding Post Connectors

Bridge-mono mode doubles the output power of the ampliﬁer.

1. See Figure 5. On the back panel, set the Output Mode Switch to BRIDGE.

2. Wire the speaker to the binding post connectors as shown.

3. Only the Channel 1 Gain Control works in Bridge-mono mode.

Setup