Spec Sheet

REVISION HISTORY

REV

DESCRIPTION

DATE

APPROVED

TITLE

SIZE

Customer

DWG NO

REV

SCALE SHEET

Depth

23.000

Infinite Built-In Storage Cabinet-Small

Engineering Release

01/01/2020

Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8

P: (519) 751-1800 www.crownverity.com

1:8

1 of 2

IBISC

Crown Verity

Width

Height

Suggested Cut-out Dimensions

18.938

19.125

DRAWN BY:

Todd Stone

Material

SS 304

01/01/2020

Dimensions are in inches

Linear Tolerance: +/- .015

Bend Tolerance: +/- .020

Angular Tolerance: +/- 0.5

Radial Tolerance: +/-.005

Door shown with righthand mounting

option. Door hardware can be

switched for a lefthand mount

PAGE 1
REVISION HISTORY REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone Door shown with righthand mounting option. Door hardware can be switched for a lefthand mount 37 Adams Blvd., Brantford, Ontario, N3S 7V8 P: (519) 751-1800 www.crownverity.com Suggested Cut-out Dimensions Height 19.125 Width 18.938 Depth 23.000 Material SS 304 Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
PAGE 2
REVISION HISTORY 18.658 DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. 22.547 1.437 21.562 REV 1.751 1.437 18.860 21.734 9.602 .