Spec Sheet

REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Depth
23.000
B
Infinite Built-In Storage Cabinet-Small
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: [phone] www.crownverity.com
1:8
2 of 2
-
IBISC
Crown Verity
Width
Height
Suggested Cut-out Dimensions
18.938
19.125
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
21.562
21.734
22.547
18.658
1.437
18.860
1.437
9.602
.500
1.437
1.751
Dimensions shown are the actual physical
dimensions. Additional clearances to the
cabinetry are dependent on the tolerances of the
cut-out. The suggested cut-out dimensions are
listed in the chart below but these dimensions
can be reduced if the tolerances are controlled.
Please refer to the product manual for
installation instructions.
Through hole mounting points
for cabinet installation