Datasheet

Table 5: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
49 Capabilities
15–14 F 00b Reserved for the IDENTIFY PACKET DEVICE command
13 F 1b 1 = Standby timer values as specified in this standard are sup-
ported
0 = Standby timer values shall be managed by the device
12 F 0b Reserved for the IDENTIFY PACKET DEVICE command
11 F 1b 1 = IORDY is supported
0 = IORDY may be supported
10 F 1b 1 = IORDY may be disabled
9 1b 1 = LBA is supported
8 F 1b 1 = DMA is supported
7–0 F 11111111b Retired
50 Capabilities
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–2 F 000000000000b Reserved
1 X 0b Obsolete
0 F 1b Shall be set to one to indicate a vendor-specific standby timer
value minimum
51 ( )X 0000h 0000h Obsolete
53 15–3 F 0000000000000b Reserved
2 F 1b 1 = The fields reported in word 88 are valid
0 = The fields reported in word 88 are not valid
1 F 1b 1 = The fields reported in words (70:64) are valid
0 = the fields reported in words (70:64) are not valid
0 X 1b Obsolete
54 ( )X 3FFFh 0010h
003Fh FC10h
00FBh
Obsolete
59 15 F 1b 1 = The BLOCK ERASE EXT command is supported
14 F 1b 1 = The OVERWRITE EXT command is supported
13 F 1b 1 = The CRYPTO SCRAMBLE EXT command is supported
12 F 1b 1 = The sanitize feature set is supported
11–9 F 000b Reserved
8 V 1b 1 = Multiple sector settings are valid
7–0 V 00010000b xxh = Current setting for number of logical sectors that shall be
transferred per DRQ data block on READ/WRITE MULTIPLE com-
mands
60 M(F) Varies by capacity Total number of user addressable logical sectors
M500DC 1.8-Inch NAND Flash SSD
Device ID
PDF: 09005aef854f62f9
M500DC_1_8_disti.pdf - Rev. D 4/14 EN
7
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.