Datasheet

Table 5: Identify Device (Continued)

See Note 1 for setting definitions

Word Bit(s) Setting Default Value Description

86 – – – Command set/feature is enabled

15 1b 1 = Words 120-119 are valid

14 F 0b 1 = Reserved

13 F 1b 1 = FLUSH CACHE EXT command is supported

12 F 1b 1 = FLUSH CACHE command is supported

11 F 1b 1 = Device configuration overlay is supported

10 F 1b 1 = 48-bit address feature set is supported

9 V 0b 1 = Automatic acoustic management feature set is enabled

8 F 0b 1 = SET MAX security enabled by SET MAX SET PASSWORD

7 F 0b Reserved for address offset reserved area boot, INCITS

TR27:2001

6 F 0b 1 = SET FEATURES subcommand required to spin-up after pow-

er-up

5 V 0b 1 = Power-up in standby feature set is enabled

4 V 0b Obsolete

3 V 1b 1 = Advanced power management feature set is enabled

2 F 0b 1 = CFA feature set is supported

1 F 0b 1 = READ/WRITE DMA QUEUED command is supported

0 F 1b 1 = DOWNLOAD MICROCODE command is supported

87 – – – Command set/feature is enabled/supported

15 F 0b Shall be cleared to zero

14 F 1b Shall be set to one

13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE is supported

12 V 0b Reserved for technical report- INCITS tr-37-2004 (TLC)

11 V 0b Reserved for technical report- INCITS TR-37-2004 (TLC)

10–9 F 00b Obsolete

8 F 1b 1 = 64-bit word wide name is supported

7 F 0b 1 = WRITE DMA QUEUED FUA EXT command is supported

6 F 1b 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT com-

mands are supported

5 F 1b 1 = General purpose logging feature set is supported

4 V 0b Obsolete

3 V 0b 1 = Media card pass through command feature set is supported

2 V 0b 1 = Media serial number is valid

1 F 1b 1 = SMART self-test is supported

0 F 1b 1 = SMART error logging is supported

M500DC 2.5-Inch NAND Flash SSD

Device ID

PDF: 09005aef854b6757

M500DC_2_5_disti.pdf - Rev. D 4/14 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.