Datasheet

Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified density. Standard LBA settings, based on the
IDEMA standard (LBA1-02), are shown below.
Table 1: Standard LBA Settings – 512-Byte Sector Size
Drive Size
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
120GB 234,441,648 DF94BB0 234,441,647 DF94BAF 120,034,123,776
240GB 468,862,128 1BF244B0 468,862,127 1BF244AF 240,057,409,536
480GB 937,703,088 37E436B0 937,703,087 37E436AF 480,103,981,056
800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416
Physical Configuration
Table 2: 2.5-Inch Dimensions
Specification
Value
UnitNom Max
Height – 7.0 mm
Width 69.85 – mm
Length 100.20 – mm
M500DC 2.5-Inch NAND Flash SSD
Logical Block Address Configuration
PDF: 09005aef854b6757
M500DC_2_5_disti.pdf - Rev. D 4/14 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.