Manualshelf

Installation Sheet

ManualsBrandsCrystorama Lighting Group ManualsChandeliersCrystorama Lighting Group Sylvan 4 Light 21-1/2" Wide Cage Chandelier with Flax Linen Shade
12
ASSEMBLYINSTRUCTIONMODEL#2244-BF
CRYST
RAMA
WARNING:
ElectricalDanger
TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Howtoinstall
9.Installthebulbs(notincluded)intothesocket.
Youwillneed -CandelabraBaseBulb4
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
This fixture is Dry rated
3.Slipthecenterrodalongwireandthreadintothe
couplinglocatedonthetopofthelightcluster.
Makesurethattheirontubesareassembledstraight
relativetothetopandbottomringbeforetightening
thetopscrewsandthebottomfinials.
(Thelongscrewsfromirontubes)
5.Spreadthearmssothatthearmsareatequal
distancefromeachother.
8.Installthefabricshadeontothecandlesleeve.
CHAIN
LOOP
ARMS
SHORTSCREWS
(Theshortscrewsfromtopsquarering)
LONGSCREWS
TOP SQUARERING
IRONTUBES
FABRIC SHADE
CANDLESLEEVE
BOTTOM
SQUARERING
BOTTOMFINIALS
LIGHTCLUSTER
COUPLING
6’’
3/4’’
21-1/2’’
29-3/4’’
6-1/2’’
4-1/2’’
4’’
FABRIC
SHADE
103-3/4’’
CENTER
ROD
4.Slipthearmassemblyalongwireandthreadinto
thecenterrod.
7.Sliptheloopalongwireandthreadontothenipple
ofarmassembly.
NIPPLE
1.Placethethreadedendofairontubeintoaholeon
thebottomsquarering.Securewithafinial.Repeat
thisfortheotherirontubes.
2.Removethelongscrewfromeachoftheirontubes.
Aligntheholesonthetopsquareringwiththeholes
thatthelongscrewswereremovedfrom.Tighten
eachscrewintotheholestosecurethetopsquare
ringandthe(4)irontubestogether.
6.Removetheshortscrewfromeachoftheholeson
thetopsquarering.Aligntheholesonthetabsof
thearmassemblywiththeholesonthetopsquare
ringandsecuretogetherusingtheshortscrews
thatwereremoved.

Summary of content (2 pages)