Installation Sheet

Table Of Contents

36"

16"

ASSEMBLY INSTRUCTION MODEL #398-CH

Bottom Swivel

Top Swivel

You will need 8 -Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

1.Do a complete inventory of all parts and

components before you start installation.

2.Attach the light clusters center Stem onto

the bottom swivel.

3.Attach all four hanging stems together,

making sure the 6” stem is installed and

located at the top.

4.Feed fixtures wiring through the stem

assembly prior to connection.

5.Now take the bottom of the stem assembly

(12” stem) and connect it to the metal

frame.

6.The top side of the stem assembly (6” stem),

will then be attached to the top swivel.

7.Insert recommended bulb (not included).

8.Dress the fixture with glass rods “A” “B” “C”

and “D”as illustrated.

Glass Rod Sets

A.20 Pieces. 16"Frosted glass rod

B.60 Pieces. 16"Clear glass rod

C.20 Pieces. 12"Frosted glass rod

D.60 Pieces. 12"Clear glass rod

NOTE: Installation sequence of glass rods

3 clear + 1 frosted rods and then repeat.

PAGE 1
ASSEMBLY INSTRUCTION MODEL #398-CH Top Swivel Bottom Swivel You will need 8 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE 16" C D A B 36" 1.Do a complete inventory of all parts and components before you start installation. 2.Attach the light clusters center Stem onto the bottom swivel. 3.Attach all four hanging stems together, making sure the 6” stem is installed and located at the top. 4.Feed fixtures wiring through the stem assembly prior to connection. 5.
PAGE 2
PART NUMBER MODEL #398-CH A B C E A. (1) - Mounting Hardware B. (1) - Canopy(L8",W5",H0.75") #XRE398CHCAN8IN C. (2) - Flat Screw D. (1) - Top Swivel E. ( 4 ) - Threaded Pipe F. (1) - Hanging Stem(6",15.9mm) #XRE394CHROD6IN G. (3) - Hanging Stem(12",15.9mm) #XRE394CHROD12IN H. (1) - Metal Frame I.