Installation Sheet

How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
ASSEMBLY INSTRUCTION
You will need 6-Cand.BULB
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
®
MODEL #8016-PN
1.Insert the shade spoke in between
top and bottom knurled nut.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
24″
18.5″
2.Secure the shade by twisting the
top knurled nut.
3.Install the recommended bulbs
(not included) into each socket.
4.Screw the big crystal ball into
the bottom box.