Installation Sheet

ASSEMBLY INSTRUCTION MODEL #CAN-A1305-CH-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING:
Electrical Danger
Turn Power Off
R
U
L
25"
28"
You will need 5-Candelabra Base Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
1. Do a complete inventory of all parts and components
before you start installing.
2. Screw the column kit on the coupling.
3. Attach the glass dish, check ring and threaded pipe to the
bottom nipple. Then place the short glass column,
check ring, small glass dish and metal washer (in that order)
over the threaded pipe. Secure them all with the finial.
4. After safely attaching fixture into outlet box, slide the glass
ring over the socket to hang it onto the glass arm. Install
small metal dish, bobeches, candle sleeves, bulbs (not
included) and proceed to connecting the power.
5. When you begin to dress the fixture, start with packet
labeled (A).
6. IMPORTANT: Apply crystal sets in alphabetical order.
How to Install
Crystal Sets
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
DETAILED ILLUSTRATION
B. 25Sets. (1)14mm+AS9-2"
C. 5Sets. (2)14mm + AS9-2.5"
A. 5Sets.
(15)14mm
D. 5Sets.
(1)14mm + AS9-2.5"
A B
C
D
F
G
E
A
B
C
D
E
F
G
E. 5Sets. (1)14mm Square+ (30)14mm+AS9-2.5"
F. 5Sets. (2)14mm+AS9-2"
G. 1Piece.
(4)14mm + AS8-40mm
(5(B) CRYSTALS)
E